There are many knowledge points about the cement inspection well mold, mainly focusing on the use of template thickness, production details and specific uses of several links. In the production of cement inspection wells, most are prefabricated. However, if the project requires on-site casting operations, only the holes at the bottom of the mold can meet the production requirements.
Although the size of the cement inspection well mold varies, its general structure consists of an inner mold and an outer mold. After polishing and bending the steel plate, the outer and inner molds are composed of cylindrical plates and rib plates. Between the inner mold and the outer mold is where the raw material is injected. However, there are screw holes and screws on the ribs of the mold to facilitate demoulding and can be disassembled and assembled.
The outer membrane of the mold can be disassembled into two pieces with screws, while the inner membrane of the screw hole can be disassembled into three pieces on the inner layer. This design is to better demold the inner membrane, so as to avoid damage to the product and reduce production costs during the production of the cement inspection well. The shape of the cement inspection well mold has multiple sectors and circles. The cement inspection well products are mainly used in urban drainage systems. The pipes under the manhole cover that we usually see on the road are basically made of cement inspection wells. The size of each pipeline is different, so the specifications of the cement inspection well mold are also different.
The mold for the cement inspection well is made of steel formwork. The specific specifications and dimensions are produced according to the data or drawings provided. While ensuring the quality of the mold, the production price of the mold is reduced. The material of the inspection well mold is an engineering steel plate. The material and mold of the mold must have a reasonable design shape to give full play to its advantages. The original white material is softer, and the design of the tightening rods around the mold must be tighter and stronger to resist the pressure of the cement on the mold, reduce the degree of deformation and make a molded cement brick, which is within the standard range. In addition to customizing cement bricks according to users, maintenance measures can be taken for later use of the mold itself, and the mold forming process of inspection wells is also constantly changing. At the same time, fast and economical mold technology is needed to adapt to changes in new materials.
The quality of the cement inspection well mold is the main factor that directly affects the product quality and cost. The main performance of the product is smooth appearance, fast mold speed, convenient and simple production conditions, and a vibration platform is added to the groove mold, which can be used for batch production. The shape of the mold is simple and the stress is small. In the process of use, we must pay attention to protect the inspection well mold, so as to avoid deformation of the mold during use and affect future use. Generally, the cement products produced require a certain degree of strength, toughness and wear resistance of the mold to meet the requirements of the mold working environment, and also have quite different performance.
Previous: No Information